 |
|
The Tacho can be set to show 0 - 8,000 RPM or 0 - 16,000 RPM and the speed can display in MPH or KMH
All the features of the ACE-3150 below, but the fuel gauge can work with 100 / 250 / 500 ohm tank senders or be switched off
 |
If all you need is a basic speedo / computer without warning lamps then the ACE-3100 can't be beaten.
With speedo, rev counter, odometer, average, max speed, riding time, clock and backlight powered from the bike, what else could you need?
Check out the speed sensors page to see which you need for your bike. We have cables to fit all bikes that were factory fitted with odometers or speedometers, and a generic magnet and sensor for those that aren't.
The 3100 unit is perfect for lightweight enduro bikes that aren't fitted with indicators or a speedo from the factory. On any bike with a 12V output to power a brake light or tail light the ACEWELL unit can be fitted to the handlebars, and connected either to the odometer drive found on Kawasaki / Yamaha / Honda / Suzuki enduro bikes or via a magnet and reed switch sensor if this has been removed. (Please specify when ordering)
 |
 |
In addition to the 3100 / 3150 speedo, the 3803 also incorporates a set of warning lamps specific for motorcycles in a neat package Indicators, Oil, Water, Main beam headlights and Neutral warning lamps are provided,
Available with or without fuel gauge Please specify sensor type when ordering